Product Architecture for Management of Random Faults
www.ti.com
Table 2. C2000 MCU Features List (continued)
C2000 32-Bit Microcontrollers - MCU
Picollo Family
(1)
Delfino Family
TMS320F2806x TMS320F2805x TMS320F2803x TMS320F2802x TMS320F2833x TMS320F2823x
32-Bit CPU 90 MHz 80 MHz 60 MHz 60 MHz 150 MHz 150 MHz
High-Resolution Pulse Width
x x x x x
Modulator (HRPWM)
High-Resolution Capture (HRCAP) x x
Quadrature Encoder Pulse (QEP) x x x x x x
Communications Peripherals
Univeral Serial Bus (USB) x
Serial Peripheral Interface (SPI) x x x x x
Serial Communications Interface
x x x x x x
(SCI)
Local Interconnect Network (LIN) x x
Controller Area Network (CAN) x x x x x
Inter-Integrated Circuit (I2C) x x x x x x
Multichannel Buffered Serial Port
x x x
(McBSP)
External Memory Bus x x x
Analog Peripherals
2-Pin Oscillators x x x x x
0-Pin Oscillators x x x x
POR and BOR x x x x
On-Chip Voltage Regulator
x x x x
(VREG)
Temp Sensor x x x x
Analog-to-Digital Converter (ADC) x x x x x x
OPAMP x
Digital-to-Analog Converter (DAC) x x x x
Comparator x x x x
56 pin
80 pin 64 pin 38 pin 176 pin 176 pin
Packaging 64 pin
100 pin 80 pin 48 pin 179 pin 179 pin
80 pin
Applications Space Motor Control Motor Control Motor Control Motor Control Motor Control Motor Control
Energy Energy Energy Energy
Energy Conversion
Conversion Conversion Conversion Conversion
Power Power
Power Conversion Power Conversion Power Conversion Power Conversion
Conversion Conversion
Automotive
Power Line Comms Automotive Radar
Radar
4.3 Piccolo MCU Family
Piccolo MCUs address a wide range of performance levels in real time control applications. The makeup
of the family is differentiated at the 32-bit CPU performance, control and analog subsystem peripherals.
Table 2 provides Piccolo MCU feature set break up. For detailed resource availability, see the device-
specific data sheet on that section and on the TI web sites.
Piccolo MCUs have proven many control topologies in motor and other emerging applications. Tight
integration of the 32-bit CPU performance and peripherals is mandatory to make these topologies a
deterministic control system. Having proven in many of these applications, at the equipment level there is
a demand to reach functional safety levels. Functional safety levels are governed by many of IEC and UL
standards to enforce safety discipline in hardware and software development. IEC60730 and UL1998
have published a series of safety test across any microcontroller device.
12
Safety Manual for C2000™ MCUs in IEC60730 Safety Applications SPRUHI3A–April 2013–Revised August 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
