CBLé System Guidebook 27
About CMD0—All Clear
List Syntax
{0}
CMD0 Operations
CMD0
clears the unit of all previous data and resets all channels to their
default settings. The only element in the list is a zero.
When you send a
CMD0
to the CBL:
¦ All channel indicators are turned off.
¦ All data is cleared.
¦ All conversion equations are cleared and
EQ
indicators turned off.
¦ Any error message is cleared.
Note: If any
AutoIDENT
probes are connected, the
AutoIDENT
default
values reactivate for those probes.
To Next Page
Loading...
