Texas Instruments CBL - Page 35

CBLé System Guidebook 35
Examples: Channel Setup Instruction
These two examples apply to the analog channels.
{1,2,3}
1= Channel Setup command.
2= Select
CH2
.
3= Measure current.
{1,1,2,3,50}
1= Channel Setup command.
1= Select
CH1
.
2= Measure voltage (±10 Volts).
3= Set up Statistics post-processing.
50= Collect 50 samples for each statistics
point.
These two examples apply to the digital output channel.
{1,31,1,15}
1= Channel Setup command.
31= Select
CH31
.
1= Number of data elements.
15= Select output data element to be digital
pattern corresponding to 1111.
{1,31,4,0,1,
2,3}
1= Channel Setup command.
31= Set up
CH31
.
4= Number of data elements.
0,1,2,3= Output 0,1,2,3
where: 0=0000, 1=0001, 2=0010, 3=0011.