Texas Instruments CBL

CBLé System Guidebook 51
Examples: Data Range Setup Instruction
{5,2,1}
5= Data Range Setup command.
2= Retrieve data from
CH2
.
1= Retrieve filtered d/dt (if filter is on)*.
{5,1,0,100,150}
5= Data Range Setup command.
1= Retrieve data from
CH1
.
0= Retrieve filtered raw collected data (if filter
is on).
100= Set Data Begin to 100.
150= Set Data End to 150.
{5,11,3}
5= Data Range Setup command.
11= Retrieve data from
SONIC
channel.
3= Retrieve unfiltered raw collected data
(ignore filter setting)*.
{5,-1}
5= Data Range Setup command.
L1= Retrieve recorded time*.
* Retrieves data from the first to the last sample.