Texas Instruments CC2541 - Windows 8; Debugging; Bluetooth Devices as Seen in Windows Device Manager

System Requirements www.ti.com
2.2.2 Windows 8
Computers running Windows 8
®
require a Bluetooth 4.0 dual mode dongle or internal hardware, with
hardware drivers that support Bluetooth low energy. You can verify that these are supported in the
Windows device manager by checking that for a reference to Bluetooth LE Enumerator.
Figure 2-2. Bluetooth Devices as seen in Windows Device Manager
2.2.3 Debugging
You must have the IAR Embedded Workbench for 8051 development environment to make changes to
the keyfob software. You can find more information on IAR in the TI Bluetooth low energy Software
Developer’s Guide (SWRU271) .
8
Introduction SWRU343A–April 2013–Revised June 2015
Submit Documentation Feedback
Copyright © 2013–2015, Texas Instruments Incorporated