Texas Instruments Metawatch MSP-WDS Series - CCS Cloud Agent Installation; Successful CCS Cloud Agent Installation

www.ti.com Hardware Installation
11
SLAU647F–July 2015–Revised December 2016
Submit Documentation Feedback
Copyright © 2015–2016, Texas Instruments Incorporated
MSP Debuggers
4.5 Hardware Installation Using CCS Cloud
CCS Cloud is web-based IDE that allows you to create, edit, and build CCS and Energia projects. After a
project is successfully built, it can be downloaded and run on the connected LaunchPad or any other
debug probe. Basic debugging features, like setting breakpoints or viewing values of target variables are
now supported.
CCS Cloud can be used with the local debug probe connected to the PC through USB. To support this
configuration, install the "CCS Cloud browser extension", and download and install the "TI Cloud Agent
Application". For more details, refer to the CCS cloud documentation at
http://processors.wiki.ti.com/index.php/TI_Cloud_Agent.
Figure 7. CCS Cloud Agent Installation
Figure 8. Successful CCS Cloud Agent Installation
After the successful Agent installation, download the application by clicking the Flash or Debug button in
CCS Cloud.