Texi 1501 TS PREMIUM User Manual

5
Texi 1501 TS
C
o
m
pu
t
e
r
i
z
ed
E
m
b
r
o
i
d
e
ry
Mac
h
i
n
e
O
p
e
r
a
t
i
o
n
Ma
n
u
al
Part 2 Embroidery Design Input Operation
The embroidery design management interface is to input embroidery designs from the
USB drive into memory. It can be operated in both the embroidery preparation status and
operation status. The system supports reading both Tajima DST and Barudan DSB formats of
embroidery design files.
Before reading the embroidery design, insert the USB device into the USB interface.
2.1 Input USB Drive Design to Memory
After USB drive is inserted, press key to enter into embroidery
design management interface. It will read the contents in USB drive, as in the following Fig. 1.
Figure 1
Select the embroidery design to input. Multi-option is available (which requires software
support.) Design stitch number (ST), number of color change (CO), size (+X,-X, +Y,-Y)
andother related information and thumbnail are displayed on the right side. Press
key to save into the memory of the machine. A text box that reads “Loading” pops up
automatically. After input is completed, it returns to design management interface
automatically and it can continue taking input operation.
Once it enters into subdirectory of input operation, press key to return to

Texi 1501 TS PREMIUM Specifications

General

Brand	Texi
Model	1501 TS PREMIUM
Category	Sewing Machine
Language	English