EN
1. Turn the stitch length dial to b1, b2, b3.
2. Mark position and length of buttonhole on fabric.
3. Insert buttonhole foot and adjust fabric that point C on the
foot will be match to point B on the fabric.
4. Choose b1
(left side of the buttonhole) on the dial. Lower
the needle and start to sew till the pint A. Stop to sew and
raise the needle to its highest position by turning the hand
wheel.
5. Choose b2
on the dial and make 4-6 stitches. Stop to sew
and raise the needle to its highest position by turning the
hand wheel.
6. Choose b3
(left side of the buttonhole) on the dial. Lower
the needle and start to sew till the point A. Stop to sew and
raise the needle to its highest position by turning the hand
wheel.
7. Choose b1
. on the dial and make 4-6 stitches. Stop to sew
and raise the needle to its highest position by turning the
hand wheel.
8. After nish, take out the fabric and cut the hole inside the
buttonhole using seam ripper.
BUTTONHOLE SEWING
A
BC
6. Start sewing.
Button sewing tips:
7. Attach a shank lever on the presser foot to help sewing.
8. To secure thread, cut the upper thread with 25cm of excess, wind
it around the thread between the button and the fabric, and then
tie it tightly.
Texi Joy 4878
To Next Page
Loading...
Need help?
General
