EN
Machine will not run 1. Cord not plugged into electrical
outlet.
2. Power switch is not turned on.
3. Bobbin winder spindle is pushed
to the right.
4. Presser foot is not lowered.
5. Buttonhole sewing mode
* Buttonhole lever is not lowered
completely.
* Buttonhole foot is not attached.
1. Insert plug fully into outlet.
2. Turn on the switch.
3. Push spindle to the left.
4. Lower the foot.
* Lower the buttonhole lever.
Texi Joy 48 83
To Next Page
Loading...
