EasyManua.ls Logo

Texi joy 48 - Helpful Hints

Texi joy 48
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
HELPFUL HINTS
Problem Cause Correction
Upper thread breaks 1. Machine not properly threaded.
2. Thread entwined around bobbin.
3. Needle inserted incorrectly.
4. Thread tension too tight.
5. Thread of incorrect size or poor
quality.
1. Rethread machine.
2. Clean bobbin area and rethread
bobbin case.
3. Reinsert needle.
4. Radjust thread tension.
5. Choose correct thread.
Lower thread breaks 1. Bobbin threaded incorrectly.
2. Bobbin wound unevenly or too
full.
3. Dirt in the bobbin and hook area.
1. Rethread the bobbin.
2. Rewind the bobbin.
3. Clean the bobbin and hook area.
Machine skip
stitches
1. Needle inserted incorrectly.
2. Bent or blunt needle.
3. Incorrect needle size.
4. Incorrect size needle on stretch
fabric.
1. Reinsert needle.
2. Insert new needle.
3. Choose correct size needle for
fabric.
4. Use stretch needle.
Fabric puckers 1. Machine not properly threaded.
2. Bobbin threaded incorrectly.
3. Blunt needle.
4. Thread tension too tight.
1. Rethread machine.
2. Rethread the bobbin.
3. Insert new needle.
4. Readjust thread tension.
Machine makes
loose stitches or
loops
1. Bobbin threaded incorrectly.
2. Machine not properly threaded.
3. Tension not adjusted properly.
1. Rethread the bobbin.
2. Rethread machine.
3. Readjust thread tension.
Threader does not
thread needle eye
1. Nedle is not raised.
2. Needle inserted incorrectly.
3. Bent needle
1. Raise the needle.
2. Reinsert needle.
3. Insert new needle
Machine does not
feed properly
1. Feed dogs are lowered.
2. Lint or dust accumulated around
feed dogs.
1. Raise the feed dogs.
2. Clean the feed dogs area
Needle breaks 1. Fabric pulled while sewing.
2. Needle is hitting the presser foot.
3. Needle inserted incorrectly.
4. Incorrect size needle or thread for
fabric being sewn.
1. Do not pull fabric.
2. Select correct foot and pattern.
3. Reinsert needle.
4. Choose correct size needle and
thread.
Machine runs with
diculty
1. Dirt or lint accumulated in the
hook race and feed dog.
1. Remove the needle plate and
bobbin case and clean the hook
race and feed dog.
Texi Joy 4882

Table of Contents

Related product manuals