Thecus N2200 User Manual

Chapter 3: First Time Setup
Overview
Once the hardware is installed, physically connected to your network, and powered
on, you can configure the N2200 so that it is accessible to your network users. There
is one way to set up your N2200: using the Thecus Smart Utility. Follow the steps
below for initial software setup.
Thecus Smart Utility
The handy Thecus Smart Utility makes configuring N2200 a snap. To configure the
N2200 using the Smart Utility, perform the following steps:
1. Insert the installation CD into your CD-ROM drive (the host PC must be
connected to the network).
2. The Smart Utility should launch automatically. If not, please browse your
CD-ROM drive and double click on autorun.exe. Click “N2200”.
3. Select the N2200 that you like to configure. Press Next to continue.
4. First, please select System Installation Wizard.
NOTE
For MAC OS X users, double click on Thecus Smart Utility Wizard .pkg file.
16

Thecus N2200 Specifications

General

RAID levels	0, 1, JBOD
Storage drive size	2.5/3.5 \
Storage drive capacity	2000 GB
Storage drive interface	Serial ATA, Serial ATA II
Storage drives installed	Yes
Installed storage drive type	HDD
Total installed storage capacity	4 TB
Number of storage drives installed	2
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9/X
USB 2.0 ports quantity	4
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Processor model	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black
Type	NAS
Device class	Home & Home Office