Thecus N2200 User Manual

Disks Information
Item Description
Disk No. Indicates disk location.
Capacity Shows the SATA hard disk capacity.
Model Displays the SATA hard disk model name.
Firmware Shows the SATA hard disk firmware version.
Status Indicates the status of the disk. Can read OK, Warning, or
Failed.
Bad Block Scan Click Yet to start to begin scanning for bad blocks.
Total Capacity Shows the total SATA hard disk capacity.
Disk Power
Management
The administrator can set the disk to power down after a period of
inactivity.
S.M.A.R.T. Information
On the Disks Information screen, the
status of each disk will be displayed in the
Status column. Clicking on an OK or
Warning link will display the S.M.A.R.T
Information window for that particular disk.
You may also perform disk SMART test,
simply to click “Test” to start with. The result
is only for reference and system will not take
any action from its result.
S.M.A.R.T. Information
Item Description
Tray Number Tray the hard disk is installed in.
Model Model name of the installed hard disk.
Power ON Hours Count of hours in power-on state. The raw value of this attribute
NOTE
When the Status shows
hard disk. It is shown
drives.
Warning, it usually means there are bad sectors on the
only as a precaution and you should consider changing the
42

Thecus N2200 Specifications

General

RAID levels	0, 1, JBOD
Storage drive size	2.5/3.5 \
Storage drive capacity	2000 GB
Storage drive interface	Serial ATA, Serial ATA II
Storage drives installed	Yes
Installed storage drive type	HDD
Total installed storage capacity	4 TB
Number of storage drives installed	2
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9/X
USB 2.0 ports quantity	4
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Processor model	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black
Type	NAS
Device class	Home & Home Office