EasyManua.ls Logo

Thecus N2200 - Network Services Configuration

Thecus N2200
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LAN Configuration
Item Description
Host name t identifies the N2200 on the network. Host name tha
Domain name Specifies the domain name of the N2200.
WINS Server To set a server name for NetBIOS computer.
MAC Address MAC address of the network interface.
Jumbo Frame Support N interface on your N2200.Enable or disable Jumbo Frame Support of the LA
IP Sharing Mode When enabled, PCs connected to the LAN port will be able to access the LAN.
Set IP Address by: You can choose a static IP or Dynamic IP, and input your network
Static / Dynamic configuration.
IP IP address of the LAN interface.
Netmask : 255.255.255.0 Network mask, which is generally
Gateway Default Gateway IP address.
DNS Server serveDomain Name Service (DNS) r IP address.
NOTE
Enabling DHCP automatically turns on UPnP— see the Service Support Screen.
A correct DNS setting is vital to networks services, such as NTP.
• Only use Jumbo Frame
other clients have Jum
settings when operating in a Gigabit environment where all
bo Frame Setting enabled.
Samba / CIFS
There are 2 options is currently allow Admin to Enable/Disable to operate N2200
associated with Samba / CIFS protocol. With the option changed, it will need to
reboot system to activate.
35

Table of Contents

Related product manuals