Thecus N2200 User Manual

RAID Auto-Rebuild
When using RAID 1 on the N2200, you can use the auto-rebuild function when an
error is detected.
1. When a hard disk fails the system beeps and/or an email notification is sent
to specified recipients.
2. Check the LCD to see which disk has failed.
3. Follow the steps mentioned above to replace the failed hard disk.
4. The system automatically recognizes the new hard disk and starts the
auto-rebuild sequence to resume its status before the hard disk crash.
82

Thecus N2200 Specifications

General

RAID levels	0, 1, JBOD
Storage drive size	2.5/3.5 \
Storage drive capacity	2000 GB
Storage drive interface	Serial ATA, Serial ATA II
Storage drives installed	Yes
Installed storage drive type	HDD
Total installed storage capacity	4 TB
Number of storage drives installed	2
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9/X
USB 2.0 ports quantity	4
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Processor model	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black
Type	NAS
Device class	Home & Home Office