Thecus N2200 - Page 18

8. Complete the N2200 Smart Utility Wizard.
A. You can access the N2200 Web Administrator interface by clicking the Start
rower button. The default password is “admin”. You can also setup a
ackup task at this point by clicking the Setup backup task button.
B
b
B. Press Exit to exit the windows utility.
The Thecus Smart Utility
Wizard is designed for installation on systems running
Windows XP/2000 or Mac OSX or later. Users with other operating systems will
need to install the Thecus Smart Utility Wizard on a host machine with one of
these operating systems before using the unit.
N
O
TE
C. Press the Setup backup task button to configure backup tasks on your
N2200.
18