Thecus N2810 Series User Manual

55
Time Zone
Sets the system time zone.
Sync with NTP Server
Select NTP server from drop down list to sync up system time
Date
Sets the system date manually.
Time
Sets the system time manually.
Apply
Click Apply to save changes.
NTP Service
The Thecus IP storage can also provide NTP service. You can also elect to
synchronize the system time on Thecus IP storage with an NTP (Network Time
Protocol) Server. To do this, simply click on NTP service button to enable it.
WARNING
If an NTP server is selected, please make sure your Thecus IP storage has
been setup to access the NTP server.

Thecus N2810 Series Specifications

General

Brand	Thecus
Model	N2810 Series
Category	Server
Language	English