90
Remove RAID
1. Select an existing RAID volume from the list.
2. Click on the Remove RAID button from left bottom corner, A confirmation
screen will appear.
3. Confirm with click “OK” to complete the “Remove RAID” operation.
Click to remove the RAID volume. All user data and iSCSI created in the selected
RAID volume will be deleted.
Expanding a RAID
To expand a RAID 1, RAID 5, or RAID 6 volume, follow the steps below:
1. Replace one of the hard drives in the RAID volume and allow it to
automatically rebuild.
2. Once rebuilt, you can continue to replace any remaining disks in the RAID
array.
3. When you are done replacing hard drives, click on RAID volume that is
going to expand capacity. System will have additional tab “Space
Expansion” appear if associated RAID volume is capable for expansion.
4. On the RAID Configuration screen, click Space Expansion.
To Next Page
Loading...
Need help?
General
