iSCSI List
Add iSCSI Target
To add iSCSI target volume, click Add from iSCSI List and associated screen will
appear.
To allocate space for an iSCSI target on the current RAID volume, follow the
steps below:
1. Select desired RAID volume from its drop down list to have iSCSI target
created.
2. Enter a Target Name. This will be used by the Stackable NAS function
to identify this export share.
3. Choose the current year from the Year dropdown.
4. Choose the current month from the Month dropdown.
5. Enable the iSCSI Target Volume by selecting Enable.
Be sure the iSCSI target volume has been enabled
or it will not list out while using Initiator to get
associated iSCSI target volumes.
To Next Page
Loading...
Need help?
General
