Part I - Setup a DynDNS Account
ns.org from your home PC.
r
4. Wait for an email from www.dyndns.org.
art II - Enable DDNS on the Router
Config > Miscellaneous
ur Home PC.
Enable the DDNS Client?
3. Sele ndns
4. Go t
a. User Name m
: xxxx
r.
3. Setup the HTTPS Server
s: Select User Defined
AS)
et
AS.
Fir
ternet Security) and are having
the following steps:
then configure the Personal
ange its
age, manually add N7700SAS IP address (i.e.
1. Go to http://www.dynd
2. Click on the Sign Up Now link.
3. Check the Check boxes, select a user name (i.e.: N7700SAS), enter you
email address (i.e.: xxx@example.com), check Enable Wildcard, and
create a password (i.e.: xxxx).
5. Open the email and click on the link to activate your account
P
1. Go to the router setup screen and select IP
DDNS Setting from yo
2. Click on Yes for
ct www.dy
o router setup
.org.
screen, and enter the following information:
or E-mail Address: xxx@example.co
b. Password or DDNS Key
c. Host Name: www.N7700SAS.dyndns.org
d. Enable wildcard? Select Yes
pdate e. Update Manually: Click U
Part III - Setting up Virtual Servers (HTTPS)
1. Navigate to NAT Setting > Virtual Serve
2. For Enable Virtual Server?, select Yes
a. Well-Known Application
b. Local IP: Enter 192.168.1.100
c. Port Range: 443 (the default HTTPS port setting on the N7700S
d. Protocol: select TCP
e. Click Add.
f. Click Apply.
4. Test the HTTPS connection from another computer on the Intern
ter a. From a remote computer, open your browser and en
.org https://www.N7700SAS.dyndns
b. You should see the login page of N7700S
ewall Software Configuration
If you are using a software firewall (i.e. Norton In
trouble connecting to the N7700SAS, you can try
an1. Double click the NIS icon on system tray, d
Firewall.
2. On the Programs page, find the SetupW
s
izard.exe and ch
permis ion to "Permit All". If it's not in the program list, use the Add or
it. Program Scan buttons to find
3. On the Networking p
192.168.1.100) to the Trusted list.
115
To Next Page
Loading...
Need help?
General
