Notification configuration
From the menu, choose the Notification item, and the Notification
Configuration screen appears. This screen lets you have the N7700SAS notify you
in case of any system malfunction. Press Apply to confirm all settings. See following
table for a detailed description of each item.
Notification Configuration
Item Description
Beep Notification Enable or disable the system beeper that beeps when a problem
occurs.
Email Notification Enable or disable email notifications of system problems.
SMTP Server Specifies the hostname/IP address of the SMTP server.
Port Specifies the port to send outgoing notification emails.
Auth Type Select the SMTP Server account authentication type.
SMTP Account ID Set the SMTP Server Email account ID.
Account Password Enter a new password.
E-mail From Set email address to send email.
Receiver’s E-mail
Address (1,2,3,4)
Add one or more recipient’s email addresses to receive email
notifications.
Consult with your mail server administrator for email server
information.
NOTE
29
To Next Page
Loading...
Need help?
General
