Thecus N7700SAS User Manual

Cable Connections
To connect the N7700SAS to your network, follow the steps below:
1. Connect an Ethernet cable from your network
to the WAN port on the back panel of the
N7700SAS.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protector socket. Press the
power supply switch to turn on the power supply.
3. Press the power button on the Front Panel to boot up the N7700SAS.
15

Thecus N7700SAS Specifications

General

Brand	Thecus
Model	N7700SAS
Category	Network Storage Server
Language	English