2. With the group or user selected, press one of the buttons from the three
access level columns at the top. The group or user t
hen appears in that
column and has that level of access to the folder.
ups and users and assigning them access levels using
an access level column, press the Remove
3. Continue selecting gro
the column buttons.
4. To remove a group or user from
button in that column.
5. When you are finished, press App to confirm your ACL settings.
ly
To setup sub-folders ACL, click on “
” symbol to extract sub folders list as screen
If one user has belong
the priority Deny > Re
ed to more than one group but different privilege than
ad Only > Writable
NOTE
shot shows below. You may carry on with same steps as share level ACL setting.
NOTE
The ACL can be set for share and sub-folders level, not for files.
The ACL screen also allows you to search for a particular user. To do this, follow the
teps below:
. In the blank, enter the name of the user you would like to find.
2. From the drop down select the group you would like to search for the user in.
3. Click Search.
s
1
70
To Next Page
Loading...
Need help?
General
