Thermal Dynamics 200 ULTRA-CUT - User Manual

PLASMA CUTTING SYSTEM
200
ULTRA-CUT
™
Operating Manual
Rev. AD Date: February 5, 2008 Manual # 0-5056
Operating Features:
Art # A-04816

Summary

SECTION 1: GENERAL INFORMATION

1.02 Important Safety Precautions

Crucial safety measures for operating plasma arc equipment.

SECTION 2: SPECIFICATIONS

2.06 Specifications & Electrical Requirements

Provides detailed technical specifications and electrical input requirements for the system.

2.10 Gas Requirements

Lists the required gases, their quality, minimum pressure, and flow rates.

2.12 XTTM-300 Torch Specifications

SECTION 3: INSTALLATION

3.01 Installation Requirements

Outlines essential electrical, gas, and cooling system requirements for installation.

3.06 Ground Connections

Discusses grounding procedures to minimize electromagnetic interference (EMI).

3.11 Set Switches on the Command - Control Module (Type 2 Module)

Instructions for setting configuration switches on the CCM module.

3.19 Install Consumable Torch Parts

Details the procedure for installing torch consumables for proper operation.

SECTION 4: OPERATION

4.01 Power Supply Control Panel

4.02 Start-Up Sequence

Outlines the proper procedure for starting up the plasma cutting system.

4.03 Gas Control Module Operation

4.05 Gas Selection

SECTION 7: TORCH MAINTENANCE

7.01 Consumable Removal

7.03 Parts Wear

7.05 Coolant Leak Trouble-Shooting

Thermal Dynamics 200 ULTRA-CUT Specifications

General

Brand	Thermal Dynamics
Model	200 ULTRA-CUT
Category	Welding System
Language	English