Thermal Dynamics CUTMASTER A120 User Manual

CUTMASTER A120
GENERAL INFORMATION 1-6 Manual 0-4989
1.07 Declaration of Conformity
Manufacturer: Thermal Dynamics Corporation
Address: 82 Benning Street
West Lebanon, New Hampshire 03784
USA
The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (European Council Directive
73/23/EEC as amended by Council Directive 93/68/EEC) and to the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the "EMC Directive" (European Council Directive 89/336/
EEC) and to the National legislation for the enforcement of this Directive.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture a unit and date of manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
*UL(UnderwritersLaboratory)rating94VOammabilitytestingforallprinted-circuitboardsused.
*Forenvironmentswithincreasedhazardofelectricalshock,PowerSuppliesbearingthe'S' mark conform to EN50192 when used in
conjunction with hand torches with exposed cutting tips, if equipped with properly installed standoff guides.
*Extensiveproductdesignvericationisconductedatthemanufacturingfacilityaspartoftheroutinedesignandmanufacturingprocess.
This is to ensure the product is safe, when used according to instructions in this manual and related industry standards, and performs
asspecied.Rigoroustestingisincorporatedintothemanufacturingprocesstoensurethemanufacturedproductmeetsorexceedsall
designspecications.
Thermal Dynamics has been manufacturing products for more than 30 years, and will continue to achieve excellence in our area of manufacture.
Manufacturers responsible representative: Steve Ward
Operations Director
Victor Technologies International, Inc. Europe
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX

Thermal Dynamics CUTMASTER A120 Specifications

General

Brand	Thermal Dynamics
Model	CUTMASTER A120
Category	Welding System
Language	English