EasyManuals Logo

Thermal Dynamics SL 60 User Manual

Thermal Dynamics SL 60
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
SERVICE 5-4 Manual 0-2888
B. Check Optional Single - Stage Filter Element, replace if necessary.
1. Shut off input power.
2. Shut off air supply, bleed down system.
3. Disconnect gas supply hose from filter.
4. Turn the Cover counter - clockwise.
5. Remove the Filter Element from the Housing and set Element aside to dry.
6. Wipe inside of housing clean, then insert the replacement Filter Element open side first.
7. Replace Housing on Cover.
8. Reattach gas supply hose. If unit leaks between housing and cover, inspect the "O" Ring for cuts or other damage.
A-02476
Filter
Element
(Cat. No. 9-7741)
Housing
Cover
Barbed
Fitting
Spring
Assembled Filter
O-ring

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thermal Dynamics SL 60 and is the answer not in the manual?

Thermal Dynamics SL 60 Specifications

General IconGeneral
BrandThermal Dynamics
ModelSL 60
CategoryWelding System
LanguageEnglish

Related product manuals