Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer Getting Started Guide

View and analyze results
■
View results in the Remote Monitoring App on the Connect cloud-
based platform ....................................................... 43
■
View results on the instrument ......................................... 44
■
Export results from the instrument (sample data les and QC reports) ....... 50
■
Analyze data ........................................................ 51
View results in the Remote Monitoring App on the Connect cloud-
based platform
1.
Open the Remote Monitoring App (see “Open the Remote Monitoring App from
Instrument Connect App“ on page 31).
2.
Click an injection group in the injection list or the plate view.
The status dials are color-coded for quality alerts:
•
—All QC tests passed.
• —At least 1 warning quality alert was triggered.
• —At least 1 failing quality alert was triggered.
Note: The Analyzed tab is disabled if the Save location for the plate setup is not
set to Cloud or if the injection group has not nished running.
3.
In the Quality alerts screen, click the Raw, EPT, or Analyzed tab to view data.
4.
As needed, select Actions4Re-inject group, select the Run module and seings,
then click Inject.
6
SeqStudio
™
Genetic Analyzer Instrument and Software Getting Started Guide
43

Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer Specifications

General

Brand	Thermo Scientific
Model	Applied Biosystems SeqStudio Genetic Analyzer
Category	Measuring Instruments
Language	English