2
Evolution One Series Spectrophotometers
Installing and Removing Accessories
Thermo Scientific Evolution One Series Spectrophotometer User Guide 21
If the connectors on the temperature controller, water supply or recirculator are a
different size, use a tubing adapter.
4. Use additional tubing and adapters (not included), if necessary, to connect the internal
chambers in the sample compartment to the ports on the accessory.
For a cell changer, set the changer to position 1 before connecting the tubing to the ports
on the accessory. Use just enough tubing to allow the cell changer to move through all
possible positions. This requires approximately 10 inches (25 cm) of tubing for each
accessory port.
To Next Page
Loading...
