2
Evolution One Series Spectrophotometers
Spectrophotometer Basics
Thermo Scientific Evolution One Series Spectrophotometer User Guide 13
To replace the panel, hook the tabs on the bottom edge over the slots in the sample
compartment side wall and tighten the thumbscrew.
Related Topics
Removing and Installing the Detector Module
Detector Access Cover
Installing Sample Compartment Windows
Corrosion Protection
The spectrophotometer contains precise optical components that may be damaged by a
corrosive environment. Before using the instrument to analyze volatile, corrosive or caustic
samples, install the optional sample compartment windows and, if necessary, purge the sample
compartment.
Related Topics
Installing Sample Compartment Windows
Purging the Sample Compartment
Installing Sample Compartment Windows
The optional windows attach to the sample compartment side walls using magnets.
NOTICE The warranty does not cover damage to internal optics or electronics caused by
failure to use sample compartment windows.
Sample compartment window
To Next Page
Loading...
