Thermo Scientific TSX Series Installation And Operation Manual

24 | Operation Ultra Low Temperature Freezers
Power Off and Standby
Mode
There is a standby power button on the front of the unit.
When pressed and held for approximately 3 seconds, the
user is prompted to confirm that the unit will be placed into
Standby mode.
To restore normal operation, the standby power button must
be pressed and held for approximately 1 second. To fully
power off the unit, while in Standby mode move the breaker
switch to the OFF position.
Note: Standby mode should not be used for more than 48
hours. Powering off the unit will conserve more energy than
leaving a unit in Standby mode.
Figure 37. Standby Button
CAUTION: In Standby mode, the refrigeration
system shuts down and the unit will not cool.
Standby Mode

Thermo Scientific TSX Series Specifications

General

Type	Laboratory Refrigerator
Cooling Type	Forced air cooling
Defrost Type	Automatic
Door Type	Solid or glass door options
Controller Type	Microprocessor
Certifications/Compliance	UL, CE
Energy Consumption	Varies by model; refer to product specification sheet
Voltage	115V
Exterior Dimensions (H x W x D)	Varies by model; refer to product specification sheet
Interior Dimensions (H x W x D)	Varies by model; refer to product specification sheet
Weight	Varies by model; refer to product specification sheet
Shelves	Adjustable shelves
Energy Efficiency	Energy Star certified models available