Need help?Do you have a question about the Thies CLIMA Winddisplay LED and is the answer not in the manual?
Lists the functions of the Winddisplay LED for different model variants.
Details the equipment and interfaces included with various Winddisplay LED models.
Explains the display of relative wind direction and velocity using LEDs.
Explains the display of true wind direction and velocity, including reference to North.
Describes how to shift the wind display by 180° for course changes using a contact.
Details mechanical installation, switchboard cutout, and mounting profiles.
Covers electrical connections, pin assignments, and rear panel connectors.
Explains setting the operating mode using DIP switches S1 and S2.
Details assigning wind transmitter types using DIP switches S3 and S4.
Describes setting wind reference for NACOS via DIP switch S5.
Describes setting wind reference for CUSTOMER via DIP switch S6.
Explains setting the baud rate using DIP switches S7 and S8.
Specifies the protocol for COM1 input from an ultrasonic anemometer.
Details output telegrams for external displays via COM1.
Provides general information on receiving NMEA telegrams via COM2 and COM3.
Describes the HDT protocol for COM2 input.
Details VBW, VHW, and VTG protocols for COM3 input.
Explains adjusting display brightness using NMEA DDC telegrams.
Lists output telegrams for NACOS and CUSTOMER interfaces.
General| Display Type | LED |
|---|---|
| Power Supply | 24 VDC |
| Protection Class | IP 65 |
| Measuring Principle | Ultrasonic |
| Manufacturer | Thies CLIMA |
| Measurement Range Wind Direction | 0 to 360° |
| Resolution | 0.1 m/s (Wind Speed), 1° (Wind Direction) |
| Application | Wind measurement for industrial and meteorological applications |
To Next Page
