© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany 021408/04/21
Phone +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·www.thiesclima.com Page 37 of 38
12 Maintenance
The Winddisplay LED is maintenance-free.
Cleaning
A damp cloth, free of chemical detergents, should be used to clean the screen and casing of
the device.
Storage
A dry, dust-free room with temperatures ranging from –20 ...+50°C is compulsory for storage
of the Winddisplay LED. We recommend box storage of the device.
Fuse
A mains fuse is located on the rear panel of the Winddisplay LED. The fuse holder can be
opened with a screwdriver.
Attention:
Strictly the following fuses may be used in the event of a fault:
230V ; 0,25AT for Winddisplay 4.3251.00.001 / 002
115V.; 0,5AT for Winddisplay 4.3251.01.001 / 002
To Next Page
Loading...
