Thies CLIMA Winddisplay LED - 7.2 Setting Wind Transmitter Type

© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany 021408/04/21
Phone +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·www.thiesclima.com Page 24 of 25
7.2 Setting Wind Transmitter Type
The assignment of the wind sensors or wind sensor pairs is carried out using switches S3 and
S4 as well as via mode settings (Mode C: for setting see chap. 9).
Mode C-0: Wind transmitter Classic or FirstClass
Mode C-1: Wind transmitter Compact
Wind transmitter type (Wind
transmitter pairing)
S3 S4 Mode C
Wind transmitter type “Classic”
4.3336.21.000 / 001
4.3336.31.000 / 001
4.3336.22.000 / 001
4.3336.32.000 / 001
4.3303.22.000 with 4.3125.32.100 / 101
4.3303.22.007 with 4.3125.32.100 / 101
4.3303.22.000 mit 4.3125.33.100 / 101
4.3303.22.007 mit 4.3125.33.100 / 101
on on 0
Wind transmitter type „Compact“
4.3129.00.000 with 4.3519.00.000
4.3519.00.000 mit 4.3129.60.000
1
Wind transmitter type “Classic”
4.3336.21.008
4.3336.31.008
4.3336.22.008
4.3336.32.008
4.3303.22.008 with 4.3125.32.100
4.3303.22.018 with 4.3125.32.100
off on 0
Wind transmitter type „First-Class”
4.3351.x0.000 with 4.3150.x0.000
on off
Wind transmitter type „WD-First-
Class” with Wv-signal acquisition
4.3150.x0.400
Note: Is valid only with supply from
the Wind display LED
off off
ON
1 2 3 4 5 6 7 8