Thies CLIMA Winddisplay LED - 2.1 Functions

© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany 021408/04/21
Phone +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·www.thiesclima.com Page 7 of 8
2.1 Functions:
4.3251.0x.001
• Measurement of the „Relative Wind“ via the wind interface or RS422 / RS
485 (ultrasonic).
• Reception of NMEA 0183 telegrams with the parameters heading and
ship’s speed.
• Calculation of the „True Wind“.
• Optional indication of „True Wind“ (True) or „Relative Wind“ (Rel.) on the
display
• Output of NMEA 0183 telegrams for PC and other equipment (NACOS
and CUSTOMER).
• Output of NMEA 0183 telegrams for actuation of external Winddisplay
LED
• Im „Master / Slave“ mode, up to 10 further Winddisplay LED’s can be
connected over a maximum distance of 1000m.
• Flexible power supply for the Wind display with 230VAC or 24VAC / 12 -
35V DC (optional 115VAC).
• In addition to front-side operation, external operating buttons can also be
connected via connecting terminals on the rear panel of the Wind display
LED.
• A 180° wind direction correction can be carried out via a connecting
terminal on the back side (ship forward or backward).
4.3251.0x.002
Same as 4.3251.0x.001, however additionally:
• Measurement of the atmospheric pressure and conversion into different
measuring units for data output.
• Measurement of the Rel. humidity and conversion into different measuring
units for data output.
•
Measurement of the air temperature for data output.
4.3251.0x.902
•
Measurement of the „Relative Wind“ via the wind interface or RS422 / RS
485 (ultrasonic).
• Reception of NMEA 0183 telegrams with the parameters heading and
ship’s speed of a GPS- SYSTEM 212520.
• Calculation of the „True Wind“.
• Optional indication of „True Wind“ (True) or „Relative Wind“ (Rel.) on the
display
• Output of NMEA 0183 telegrams for PC and other equipment (NACOS
and CUSTOMER).
• Output of NMEA 0183 telegrams for actuation of external wind display
LED
• In the „Master / Slave“ mode, up to 10 further wind display LED’s can be
connected over a maximum distance of 1000m.
• Flexible power supply for the wind display with 230VAC or 24VAC / 12 -
35V DC (optional 115VAC).
• In addition to front-side operation, external operating buttons can also be
connected via connecting terminals on the rear panel of the wind display
LED.
• A 180 ° wind direction correction can be carried out via a connecting
terminal on the back side (ship forward or backward).
• Measurement of the atmospheric pressure and conversion into different
measuring units for data output.
• Measurement of the Rel. humidity and conversion into different measuring
units for data output.
• Measurement of the air temperature for data output.
• Electrical supply of a GPS system 212520.
•
Electrical supply of a Level Converter 9.1720.50.000.