Using recording features
20
* When an impact to the vehicle is detected during continuous recording, incident continuous recording starts with a
double beep sound.
• Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
• When incident continuous recording starts, a double "beep" sounds as a notification. This function saves
you time when checking the status LED to know the operating status of the product.
• To enable recording, you must insert a memory card into the product.
3.4 Recording manually
You can record a scene you want to capture while driving and store it as a separate file.
To start manual recording, press the manual recording (REC) button. Then, manual recording will start with
the voice guide.
During manual recording, the product operates as follows.
Mode Operation description Recording LED (REC)
Manual recording
When you press the
manual recording (REC) button, a video will
be recorded for 1 minute, from 10 seconds before to 50 seconds after
pressing the button, and stored in the "manual_rec" folder.
(flickers)
3.5 Using the SOS recording feature
You can record a scene when an accident occurs while driving or parked and store it as a separate file.
To start SOS recording, press the manual recording (REC) button for 3 seconds. Then, the voice guide will
indicate that SOS recording has started.
During SOS recording, the product operates as follows.
Mode Operation description
Recording LED (REC)/
Wi-Fi LED (WiFi)
SOS recording
If you press the
manual recording (REC) button for 3 seconds
when an accident occurs, a video will be recorded for 10 seconds
(from 5 seconds before the accident to 5 seconds after pressing the
button) and stored in the "sos_rec" folder.
(flickers)
According to the data service policy, if you have used all of the SOS recording upload usage times, pressing
the manual recording (REC) button will save the recorded video to the SD card, but may not upload it to
the THINKWARE CONNECTED application. Visit THINWARE website (https://www.thinkware.com) for more
information.
To Next Page
Loading...
