Thinkware D4K64DM - Front Camera (Main Unit) - Rear View

Product overview
8
• To reset the product, press and hold the voice recording ( ) and manual recording (REC) buttons
simultaneously until you hear beeps.
• The security LED status may vary depending on the selected mode.
• Refer to the following table to check the status of the product using the LED indicators.
For more information about the REC LED, refer to "3.3 Using the continuous recording feature" on page 19.
LED LED status Operation description
BT/WiFi
(light on) Wi-Fi connected
(light on) / (flickers)
Bluetooth on/Bluetooth pairing
> >
(flickers) Bluetooth/Wi-Fi reset
(light on) Internet Mode connected
GPS
(light on) GPS connected
Misc. Wi-Fi
>
REC
>
GPS (flickers) Firmware upgrade
1.2.2 Front camera (main unit) - rear view
Mount connector
Used to connect the mount.
Front camera lens
Records the front view.
V-IN input port
Used to connect the rear
camera.
RADAR port
Used to connect the
RADAR module (optional).
DC-IN power port
Used to connect the power
cable.