Settings
33
7.4 Setting road safety features
From the mobile viewer, tap Dash Cam settings
>
Road Safety Settings to manage the road safety features
settings.
Options Description
Safety Cameras Select from Enabled/Disabled for the safety cameras.
Mobile Zone Alert Select from Enabled/Disabled for the mobile zone alert.
Vehicle Type Select the vehicle type from Sedan/SUV/Truck (Bus).
Initialize ADAS In Initialize ADAS, tap Initialize
>
OK to proceed with initializing.
LDWS
(Lane Departure Warning)
Select from Disabled/Low/Mid/High for the LDWS sensitivity.
LDWS Speed Select from 50km/h / 60km/h / 80km/h / 100km/h for the LDWS detection speed.
FCWS
(Forward Collision Warning)
Select from Disabled/Low/Mid/High for the sensitivity.
Low Speed FCWS Select from Disabled/Low/Mid/High for the sensitivity.
RCW
(Rear Collision Warning)
Select from Enabled/Disabled for the RCW feature.
RCWS Speed Select from 50km/h / 60km/h / 80km/h / 100km/h for the RDWS detection speed.
Rear Collision Recording Select from Enabled/Disabled for the rear collision recording feature.
FVDW (Front Vehicle Departure
Warning)
Select from Enabled/Disabled for the FVDW feature.
7.5 Configuring the system settings
From the mobile viewer, tap Dash Cam Settings
>
System Settings to configure the hardware system settings.
Options Description
Language
Select the desired language.
Volume
Select the desired volume level for each feature (Safety Cameras/ADAS/System
and Others).
Security LED
Select from Lateral/Blink/Spread/Disabled for the security LED.
Rear Camera LED
Select from Enabled/Disabled for rear camera LED.
Time Zone
Select the date and time.
Daylight Saving
Select from Enabled/Disabled for the daylight saving.
Speed Unit
Select from km/h/mph for the speed unit.
Speed Stamp
Select from Enabled/Disabled for the speed stamp.
Wi-Fi Frequency Band
Select from 2.4GHz/5GHz for the Wi-Fi frequency.
Internet
Select from Enabled/Disabled for Internet mode.
If you select 0 for the volume level, the voice guidance will be disabled.
To Next Page
Loading...
