17
3. Using recording features
3.1 Turning the product on or off
The product is turned on automatically and continuous
recording starts when you turn on the ACC or start the
engine.
If you want to turn off the product, turn the Power switch
up.
To turn the power on again, turn the Power switch down.
Wait until the product is completely booted up after
turning it on, and then begin operating the vehicle.
The video recording does not begin until the product
is completely turned on (booted up).
Continuous recording and parking mode recording
The continuous recording and parking modes are the basic operation modes of the product.
Continuous recording starts when you start driving. While driving, videos are recorded continuously and
stored as 1 minute segments.
When you finish driving and turn off the engine, the recording mode switches to parking mode. In parking
mode, the product detects the impact to the vehicle and nearby motion and records every event.
Parking mode operates only when the continuous power cable is connected.
To Next Page
Loading...
