Thinkware X700 - Initializing ADAS Calibration; Setting the Lane Departure Warning Feature (LDWS); Setting Lane Departure Detection Speed (LDWS Speed)

Settings
36
5.3.5 Initializing ADAS calibration
You can initialize the ADAS calibration screen. Follow the instructions to initialize ADAS calibration.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
button next to Initialize ADAS under ADAS Features.
2
When the confirmation window appears, tap the confirmation button ( ). The ADAS calibration
settings will be initialized.
5.3.6 Setting the lane departure warning feature (LDWS)
When the vehicle departs its lane, the LDWS will detect the lane departure via the real-time video image
and warn the driver. Refer to the following instructions to set the detection sensitivity or activate or
deactivate this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
button next to LDWS (Lane Departure Warning) under ADAS Features.
2
Switch the button to Low, Mid, or High to set the detection sensitivity, or OFF to deactivate the feature.
The new setting is applied to the system as soon as a change is made.
5.3.7 Setting the lane departure detection speed (LDWS speed)
You can change the lane departure detection speed. Refer to the following instructions to set the lane
departure detection speed.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road Safety Settings, and then tap the
button next to LDWS speed under ADAS Features.
2
Switch the button to 50km(30mph), 60km(40mph), 70km(50mph), or 80km(65mph). The new setting is
applied to the system as soon as a change is made.