7.11 Metronome
1. Switch on metronome
To turn on the metronome, press [MODE] repeatedly until the [METRONOME]
LED lights up.
2.
Press to start playing with the metronome.
ð
The LED of the button ashes.
3. Setting the time signature
Press [<] or [>] to set the desired time signature (see
Ä
Chapter 10 ‘Metronome
rhythm list’ on page 34).
Alternatively, hold down [SHIFT] and set the desired time signature with the
piano keys [C3]…[A3].
– If you want to change the time signature with the piano keys [C3]
to [A3], always enter it in two-digit format. For example, to set
the time signature ‘4/4 Beat’ , hold down [SHIFT] and press the
piano keys [A3] and [C#3] in succession.
4. Adjusting the volume
Hold down [SHIFT] and use the piano keys [D6] or [E6] to adjust the volume.
5. Setting the tempo
All preprogrammed time signatures contain certain tempo information. You
can set the tempo as described here
Ä
Chapter 7.13 ‘Tempo’ on page 23.
6. Turning o the metronome
Press to disable the metronome.
Alternatively, press [MODE] to switch to another mode.
ð
The [METRONOME] LED turns o.
Metronome function is not available in song mode.
Switching on / o and basic operation
DP-28 Plus
21
To Next Page
Loading...
