7
2. 2 SEAT AND SEAT BELT
The loader is equipped with an adjustable seat which can
be moved forward or back for operator comfort. (Fig. 2.
2A)
For your safety, the loader is equipped with a seat belt.
Before starting the loader, adjust and fasten the beat belt
around you. (Fig. 2. 2B). The Thomas seat and seat belt
also have integrated safety lock switches whereby the
operator must be seated in the seat with the belt securely
fastened, before the loader can be operated.
2. 3 SEAT BAR
For operator protection, the loader is equipped with a seat
bar. The seat bar is also an integrated part of the braking
system. When the seat bar is raised, the park brake is
automatically applied. Make sure the machine has come to
a full stop before raising the seat bar.(Fig. 2. 3A).
To raise the seat bar, lift up on the seat bar until it locks in
the UP position (Fig. 2. 3A).
2 CONTROLS
To prevent personal
injury do not start the
engine unless you are in
the seat with the seat belt
fastened around you.
WARNING
Fig. 2. 2A
C - 869
Fig. 2. 2B
C-881
C3252
Fig. 2. 3A
Seat Bar
Adjuster