20
6.1. Picture Mode
Press the s / w button to select Picture Mode, then press the OK button to enter sub-menu.
You can change the value of contrast, brightness, color, sharpness and tint when the picture is in Personal mode.
Contrast / Brightness / Color / Tint / Sharpness
Press the s / w button to select option, then press the Enter button to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Brightness Adjust the optical ber output of the entire picture Increasing brightness of an image will
light out all colors so the original light ones will become up to white. Reversely, decreasing
brightness will darken all colors so the original shaded ones will become up to black.
Color Adjust the saturation of the color based on your own
preference.
Tint Use in compensating colour changed with the transmission in the NTSC code.
Sharpness Adjust the peaking in the detail of the picture.
Color Temp
Change the overall color cast of the picture.
Press the s / w button to select Color Temperature, then press the OK button to enter sub-menu.
Press the s / w button to select. (Available Picture mode: Cool, Normal, Warm).
Cold Increase the blue tone for the white.
Normal Increase the sex-linked colors for the white.
Warm Increase the red color for the white.
To Next Page
Loading...
