1 SpeedTouch™ Installation
E-SIT-CTC-20030306-0003 v3.0
11
Local networking setup Depending on the SpeedTouch™ variant you have, various solutions are available to
connect your computer(s) to the device:
• Ethernet connectivity
See “1.2.1 Local Ethernet Connection Setup” on page 12 for more information.
• USB connectivity
USB connectivity is supported for MS Windows 98/98SE/ME, MS Windows 2000/
XP, Mac OS 8.6/9.x and Mac OS X 10.1/10.2. Before being able to connect to the
SpeedTouch™ through the USB connection you must first install USB drivers.
See “1.2.2 SpeedTouch™ USB Connection Setup for Microsoft Windows Oper-
ating Systems” on page 13 and “1.2.3 SpeedTouch™ USB Connection Setup for
Mac Operating Systems” on page 16 for more information.
In case of a SpeedTouch™ with USB connectivity you can use both local networking
solutions simultaneously to form a single local network.
Internet connection
setup
To continue with preparing the SpeedTouch™ for Internet connectivity, see
“1.3 SpeedTouch™ Configuration Setup” on page 20.
To Next Page
Loading...
