3 SpeedTouch™ Web Interface
E-SIT-CTC-20030306-0003 v3.0
59
3.3 SpeedTouch™ NAPT Manager
Introduction The SpeedTouch™ NAPT Manager allows you to add static NAT entries for specific
applications.
Using SpeedTouch™
NAPT Manager
To add a static NAPT entry using SpeedTouch™ NAPT Manager:
1 Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
Note If the SpeedTouch™ CD Browser window does not appear automati-
cally, click Run on the Start menu and enter the following path:
D:\Menu.exe where D stands for the drive letter of your CD-ROM
drive.
2 The SpeedTouch™ Menu appears:
Click Configuration.
3 The following window appears:
Click Configure NAPT Settings.
To Next Page
Loading...
