THOMSON SpeedTouch 510 - Configuration Setup for Microsoft Windows Operating Systems

1 SpeedTouch™ Installation
E-SIT-CTC-20030306-0003 v3.0
21
1.3.1 Configuration Setup for Microsoft Windows
Operating Systems
Microsoft Windows One of the following Windows operating systems must already be installed on your
PC(s):
• Windows 98
• Windows 98SE
• Windows ME
• Windows NT4.0 SP6 (Ethernet only)
• Windows 2000
• Windows XP
You may need the Windows installation CD-ROM during installation.
The SpeedTouch™
Setup wizard
The SpeedTouch™ Setup wizard procedure consists of two major parts:
• The detection procedure
• The configuration procedure
The detection
procedure
The detection procedure proceeds as follows:
1 Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
Note If the SpeedTouch™ CD Browser window does not appear automati-
cally, open a Run window via Start > Run from the Start menu and
enter the following path: D:\Menu.exe, where D stands for the drive
letter of your CD-ROM drive.
2 The Choose Language window prompts you to select a language:
Select the language of your choice and click OK.
3 The SpeedTouch™ CD Browser appears:
Click Initial Setup.