7.3.1 Language
This menu allows you to set up your language preferences.
Language: Use tu to select the language for the On Screen Display.
First Audio: Use tu to select Audio language.
Second Audio: Use tu to select a language that will be played when the
language selected at First Audio isn’t available.
Subtitle Language: Use tu to select the preferred subtitle language.
2nd Subtitle Language : Use tu to select the preferred 2nd subtitle language if the
1st preference is not available.
Teletext: Use tu to select the preferred Teletext language (when
available).
Subtitle: Use tu to select the preferred subtitle type to be displayed
automatically. Select Normal, Hard of Hearing or Off*
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
7.3.2 TV System
Use this menu to match your receiver to your TV set. The following settings are
available:
Video Resolution: Use this option to select the video resolution of your TV
screen. The options are: By Source (automatic detection
of video resolution offered to the receiver), By Native TV
(automatic detection of maximal resolution of TV screen), and
manual selections 480i, 576i up to 1080p. Please use a setting
that matches the specifications of your TV. After a selection
is made, you will be asked to confirm. Selection above 576i is
only applicable on HDMI output.
Aspect Mode: Use this option to select the aspect ratio of your TV and
the preferred conversion method. The options are: Auto
(automatic detection of aspect ratio), 4:3 Panscan (Displays
16:9 widescreen broadcasts full screen on your 4:3 TV), 4:3
letterbox (black bars on top and under the picture on a 4:3 TV)
and 16:9 (use this setting for 16:9 TV sets).
Connection: Use this option to select the connection to your TV set. Select
HDMI or TV SCART. If connection type HDMI is selected, then
only the CVBS signal is available on the TV SCART.
Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is
selected, all digital audio will be converted to stereo audio.
Bitstream enables you to listen or transfer Dolby® Digital/
To Next Page
Loading...
