P18
MAIN MENU
Dolby® Digital Plus* audio to the TV via HDMI or to a Home
entertainment system (for example) through coaxial S/PDIF.
NOTE: Dolby® Digital Plus* is only available on the HDMI output.
*Dolby® and the double-D symbol are registered trademarks of Dolby® Laboratories
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region: Use tu to select the region you live in.
GMT Usage: Set to By Region for broadcaster defined time, User Define to
select manual a GMT zone or to Off to input time and date
manually.
GMT Offset: Allows you to adjust your time zone. This option is only
available when GMT Usage is set to User Define.The GMT
Offset range is “-11:30 ~ +12:00”, increasing by half hours
progressively. The cities matching the set GMT Offset are
displayed at the bottom of the screen.
Daylight Saving: Select On to add one hour for summer time.
Date: Date and Time settings are available only when GMT Usage is
set to Off. Use the 0~9 buttons to enter the date. Press EXIT to
proceed.
Time: Date and Time settings are available only when GMT Usage is
set to Off. Use the 0~9 buttons to enter the time. Press EXIT to
proceed.
Time Display Select On to display time on screen, Off to remove.
7.3.4 Timer Setting
This menu allows you to set up to 8 timed events for recording or waking up the
receiver.
Use pq to select Timer Setting from the System Setup menu and press OK to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select
the timer you wish to set or change with pq and press OK to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off the timer is inactive, Once, Daily (the
timer will be executed every day, same time) or Weekly (the
timer will be executed every week, same day, same time) and
Monthly (the timer will be executed every month, same day,
same time).
To Next Page
Loading...
