PDXC2 ORIC® Piezo Stage Controller Chapter 3: Software
Page 12 CTN015391-D02
Stop Control - halts the movement of the motor.
Home - sends the motor to its 'Home' position or set the position steps count to zero.
Performance Optimize – Control device to start a performance optimize process.
Abnormal Move Detection – Enable/Disable the function of abnormal move detection.
Jog Controls - used to increment or decrement the motor position.
Status indicator LED - Indicates the status of device. Homed LED indicates whether a home process has
been taken. Error LED indicates whether an error has been generated. The error information is given by moving
the mouse pointer on Error LED. Pulse Params indicates whether a performance optimize operation has been
taken.
Settings - Displays the 'Settings' panel, which allows the operating parameters to be entered for the motor
drive.
Identify - When this button is pressed, the ACTIVE LED on the front panel of the associated hardware unit will
flash for a short period.
3.3.2 Introduction for Settings Panel
When the 'Settings' button on the GUI panel is clicked, the 'Settings' window is displayed. This panel allows
motor operation parameters such as move/jog speed, and PID to be modified. Note that all these parameters
To Next Page
Loading...
