THORLABS TSP01 User Manual

© 2018 Thorlabs4
TSP01
1 General Information
The TSP01 is a device of the size of a USB thumb drive that can be plugged to any USB port
for reading up to three different temperature values and relative humidity.
The combined humidity and temperature sensor is embedded into the USB stick, a second
NTC temperature sensor TSP-TH is included and can be connected to the housing. A third op-
tional temperature sensor can be plugged to the USB housing. External temperature sensors
can be an additional Thorlabs TSP-TH or any other NTC type sensor. The Thorlabs TSP01 Ap-
plication software allows to enter individual NTC parameters, such as R0 (reference resist-
ance), T0 (reference temperature) and the B coefficient.
The TSP01 can be run and data can be displayed in the Thorlabs TSP01 Application software
as a separate GUI. Alternatively, the TSP01 can be run from the Thorlabs' Beam Profiler Soft-
ware.
Further, users have the choice to write a separate application or use a third party GUI. For this,
please see the chapter Write-Your-Own-Application .
Attention
Please find all safety information and warnings concerning this product in the chapter Safety
in the Appendix.
1.1 Ordering Codes and Accessories
.
TSP01
Temperature and Humidity USB Sensor Probe with external temperature
sensor
TSP-TH
External temperature probe for TSP01
19
33

THORLABS TSP01 Specifications

General

Brand	THORLABS
Model	TSP01
Category	Measuring Instruments
Language	English