SPECIFICATION / 規格表
Length / 全長:
Height / 總高度:
Width / 全寬:
Main rotor disc diameter / 主旋翼旋轉直徑:
Tail rotor disc diameter / 尾旋翼旋轉直徑:
Motor drive gear / 馬達驅動齒:
Main gear / 主齒盤:
Tail grive gear / 尾驅動齒盤:
Tail pulley / 尾傳動齒:
Gear Ratio / 齒輪傳動比:
Weight (w/o battery) / 全配重量 (不含電池):
640 mm (25.19 in)
209mm (8.2 in)
120mm (4.72 in)
745mm (28.46 in)
156mm (6.14 in)
13T
150T
124
14T
1:11.5:4.4
approx. 625g (22.04oz)
640
120
209
ø315
ø745
ø156
FEATURES / 特色
1. Super Rigid Carbon Frame & CNC Machined Aluminum Construction
2. Slim & Aerodynamic Pre-Painted Fiberglass Canopy
3. One-piece Low Gravity Molded Skid /Integrated Antenna Holder
4. 2-piece Reinforced Carbon Main Frame (1.5mm)
5. Integrated One-piece High-positioned Battery & ESC Tray
6. Adjustable Bell-Hiller Mixing Ratio
7. One-piece Machined Aluminum Mast Block /Servo Mount
8. Metal & Carbon Light Tail Case/ Metal Grips
9. Canopy With Integrated Heat Sink For Efficient Thermal Dissipation
10. Equipped With Lightweight Paddles for 3D (4.4gr)
1. 高剛性碳纖維及金屬結構主體
2. 原廠塗裝完成玻纖材質機頭罩
3. 一體式低重心腳架及天線組
4. 二片式強化碳纖維主側板
5. 整合式高置電池座及速控器座
6. 可調式混控比率旋翼頭組設計
7. 一體式金屬主軸軸承座及伺服機座
8. 金屬/碳纖維輕量化尾殼/金屬夾片
9. 高效率散熱孔設計機頭罩
10. 標準搭配3D版輕量化平衡翼
THUNDER TIGER CORPORATION
C 2010
www.thundertiger.com
Printed in China
雷虎科技
JK0239 V4
To Previous Page
Loading...
Need help?
General
