Tiger JPK-G10A - How to Remove and Attach each

46 47
Cleaning and Maintenance
English
Removing the steam cap
Steam cap
(3) Remove
(3)
Cap unit
(2) Open
(1) Press
How to Remove and Attach Each Component Part
Attaching the steam cap
Hook
Cap unit
Cap lid
Fit and engage the cap
unit with the cap lid.

Unless they are engaged rmly,
they may come o󰀨 or steam may
leak out of the rice cooker, resulting
in malfunction.
1
Push it until
the hook is
engaged with
the tabs.
2
(1) Fit
(2)
Fit in
Firmly t the
steam cap in at
the front rst.
3
CAUTION
Fit the steam cap in securely. Otherwise, rice may not be cooked properly
or the contents may boil over, resulting in burns.
Attaching the steam cap gaskets
When the steam cap gasket, etc. comes o󰀨, carefully set the gasket in place as shown in the gure.
CAUTION

Be sure to use the rice cooker with all gaskets in place.
Otherwise, steam may leak out and rice may not be cooked
properly.

Fit all gaskets in securely. Otherwise, they may come
o󰀨 or steam may leak out of the rice cooker, resulting in
malfunction.

Do not remove the ring gasket. If it comes o󰀨, attach it as it
was. (If it is hard to attach, moisten it with water for easier
attachment.)
Cap unit Cap gasket (large)
Fit in
Ring gasket
Cap lid
Cap gasket (small)
Insert your ngers into the
opening of the lid and pull up
the steam cap to remove it.
1
Remove it as shown below.
2
Attaching the gasket for depressurization
Be sure to attach it in the
correct direction. Otherwise
rice may not be cooked
properly.
If the gasket for
depressurization is hard to
attach, moisten it with water
for easier attachment.
Remove the inner lid toward
you.
2
Removing the inner lid
Pull up the inner lid button.
1
Attaching the inner lid
Set the left and right tabs of the
inner lid in the slots securely.
1
ClickClick
Push in until it clicks.
2
Inner lid
button
Pull up
Holding tab
Tab Tab
CAUTION

Do not pull on the lid gasket and inner lid gasket. It cannot be
reattached once it is removed.

When the lid gasket or inner lid gasket comes o󰀨, contact the
place of purchase.

Lid gasket: Do not remove the gasket. Do not press or pull it
forcibly. Doing so may cause steam leaks or sticking of the lid,
resulting in malfunction.
Inner lid gasket Lid gasket
Gasket for
depressurization
Pull
Front side
Gasket for
depressurization